AROS FIELD APPPlacement Studio×

AROS INTEGRATED

Placement Studio

Opening your workspace…

Sign in Back to Field App

Your wall

3D CONCEPT

Choose your wall

Open the camera or add a wall photo.

POWERWALL 3

See the possibility.
Right on your wall.

A better view of your home’s energy future.

Drag to explore the modelTESLA POWERWALL 3 1.105 × 0.609 m

Capture wall · then set scale

1 Powerwall 313.5 kWh · Not placed

Concept preview · Final placement pending site survey

PLACEMENT STUDIO

Your system

Tesla Powerwall 3

Full-size enclosure · 13.5 kWh per unit

PowerwallsExpansions

Expansion arrangement

Spacing is illustrative. Hardware, harness compatibility and mounting need installer review.

Orientation 0°Selected unit

On a wall photo, drag the selected Powerwall to move it.

Fine position

Horizontal (m)Base height (m)

A good fit starts with a measured site.

01

Set the scale

Photo scale unverified

02

Mark nearby openings

Doors, windows and obstacles

Confirmed project clearance target (m)

Confirm this with your installer and local authority. No universal clearance is assumed. Photo calculations are estimates on one flat wall plane.

I have marked all relevant nearby openings and reviewed the measurements for this exact placement.

Green means the recorded checks pass your target. It is not code compliance or installation approval.

Keep the vision.

Preview title

Choose Save Image or Save to Files from your phone’s menu. Otherwise, check Downloads. Photos stay on this device.

Drafts are stored in this browser. Clearing browser data removes them.

Point. Place. Picture it.

Open the camera and capture a straight-on wall photo, or use Live AR on a supported phone.
Choose the system. On a photo, calibrate a known length and drag the Powerwall into position.
Mark openings and record measurements in Site review. Save the finished view to your phone.

Red Placement is blocked or a conflict was found.

Amber A concept only; checks remain incomplete.

Green Recorded checks pass the project target.

Camera photo mode is not spatial tracking. Native iPhone AR is a separate preview and does not run these clearance checks. Browser AR camera capture uses your phone’s screenshot controls.

Every placement remains pending site survey, mounting and electrical design, manufacturer requirements and local approval.

See it at full size.

Your phone’s AR viewer can place the model in your space. The red / amber / green site checks stay in the Field App and do not transfer into this viewer.

Confirm the viewer shows 100% scale. Native tracking and wall placement vary by device. Take a screenshot in AR to save the view.

Open iPhone AR ↗

Preparing your system…

Concept only · Pending site survey

AROS / PLACEMENT

Find a surface

Move your phone slowly near the wall.

True-size concept · Clearances unverified · Pending site survey

ValueMeasurement method / reference